Last time I stopped working with MyLoom when we had got the warp transferred to the warp beam. Then I needed to go back a bit. I lift the warp up; see the raddle behind. I didn't loose it from the warp but from the beater and fastened it to hang from the upper parts of MyLoom. It is like a comb by which the warp stays in a perfect order. Then I set the harness and heddles ready.
After the heddles it was time for the reed. When I got through it, it was time to tie up the warp and see if it all was working.
Ta-dah! It is working!
I cut some weft from an old fabric and it turn out pertty nice. We'll see if I do anything of it!